What You’ll Need:

• A glue gun
• Four 50 pound weight magnets
• Wire cutters
• wire solder
• Two 9 volt batteries
• 2 rocker switches
• soldering irons
• an old pair of shoes>/li>

Step by Step Procedure

Step 1

Take your soldering iron, and connect the positive and negative contact points of your battery to separate wires.

Step 2

Follow suit with the rocker switch. Put the positive point on the positive contact and the negative as well on the opposite.

Step 3

Add some glue to the heel end of the shoe. Glue a magnet on securely, and repeat the same process with the tip as well.

Step 4

Take you 9 volt batter y and glue it to the side. Take your switch and glue it to the side as well. Make sure you leave the contact points open.

Step 5

Take another wire and solder it to the positive contact point of the rocker switch. Do the same with the 4th wire. Solder the first part to the back of the heel, and do the same with the 4th wire to the front of the shoe. Be careful with soldering.

Step 6

Go to your garage and go to where the metal beams are. Or go to a predominantly metal floor. Enjoy!

Watch The Video

How to Build Hover Shoes